Characteristics of immunosorbents used as a new approach to selective solid-phase extraction in environmental analysis

Summary The trace-level determination of organic pollutants in complex matrices is difficult and often not reliable because theccurrent extraction procedures are non-selective. New extraction sorbents involving antigen-antibody interactions, called immunosorbents (ISs), have been synthesised in order to trap a group of structurally related pollutants. The IS capacity is always high for the analyte-antigen used to make the antibodies, but can be low for some related compounds. In this work, we show the relationship that exists between capacity, break-through volume and recovery of analytes because of the competition between the structurally related compounds for antibody sites. Breakthrough due to the overloading of the column should be avoided because calibration curves are no longer linear. The capacity of two ISs, one made for trapping the triazine pesticide group and the second for the phenylurea, group, have been optimised by selecting silica with 50 nm pore size. Calibration curves are linear for all the compounds in a mixture of ten phenylureas up to a concentration of 5 to 10 μg L⁻¹ for each compound when handling 50 mL water samples through a precolumn packed with 0.22 g of IS. Under these conditions, reliable quantitative results are obtained because calibration curves are similar when compounds are alone or in a mixture. Application to the clean-up of soil extracts illustrates the high selectivity and the high potential of these new sorbents in environmental analysis. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

The use of silicon in the preparation of apolar glass capillary columns

As an extention of previous reports, variables affecting the performance of columns modified by silicon deposition have been optimized. The aim of this work was to produce thermostable apolar glass capillary columns regardless of the glass type used and to maintain column performance under stressful conditions. The main parameters studied were the influence of glass type, leaching effects, and silicon layer thickness on column activity. Deactivation and stationary phase conditions were held constant. Both coated and uncoated columns were tested. The thickness of the silicon layer was found to be relatively unimportant. There was no difference whether soft glass or borosiiicate glass was used and leaching before silicon deposition did not influence column activity. Bare silicon surfaces showed considerable activity especially in respect to interactions with free acids and bases. There are indications that the surface consists of silicon oxide and other oxygenated forms of silicon rather than of the element. Treatment of the silicon layers with dilute hydrofluoric acid and the strict exclusion of traces of oxygen and water did not improve the situation. In spite of such specific interactions, silicon surfaces were easily deactivated by heat treatment with polysiloxanes. Silicon surfaces deactivated by baking with octamethyltetrasiloxane at 400°C are inert and temperature stable and show characteristics similar to persilylated surfaces.     

Synthese,Struktur und Reaktivität von Bis(dialkylamino)diphosphanen

Synthesis, Structure, and Reactivity of Bis(dialkylamino)diphosphines Starting with the aminochlorophosphines ⁱPr₂N? PCl₂ 1 and (ⁱPr₂N)₂P? Cl 2 , the synthesis of some new functionalized aminophosphines (ⁱPr₂N)₂P? SiMe₃ 3a , (ⁱPr₂N)₂P? SnMe₃ 3b , (ⁱPr₂N)(DMP)P? Cl 4 , ⁱPr₂N? P(SiMe₃)₂ 5 and ⁱPr₂N? P(SiMe₃)Cl 6 is reported. Reactions of 2 with different phosphides yield the aminodiphosphines (ⁱPr₂N)₂P? P(SiMe₃)₂ 7a , (ⁱPr₂N)₂P? P(SiMe₂^tBu)₂ 7b , (ⁱPr₂N)₂P? PPh₂ 8 and (ⁱPr₂N)₂P? PH₂ 9 . The phosphines 3a/b react with halogenophosphines to the aminohalogenodiphosphines (ⁱPr₂N)₂P? PCl₂ 10 , (ⁱPr₂N)₂P? P^tBuCl 11 and (ⁱPr₂N)₂P? P(NⁱPr₂)Cl 12 . The ambivalente aminophosphine 6 gives the aminotrichlorodiphosphine Cl(ⁱPr₂N)P? PCl₂ 13 after condensation with PCl₃, while the reactions with the corresponding lithiumphosphides yield the aminosilyldiphosphines (ⁱPr₂N)(SiMe₃)P? P(SiMe₃)₂ 14a and (ⁱPr₂N)(SiMe₃)P? P(SiMe₂^tBu)₂ 14b . The aminochlorophosphines 2/4 are reductively coupled with magnesium leading to the symmetrically substituted tetraaminodiphosphines (ⁱPr₂N)₂P? P(ⁱPr₂N)₂ 15a and DMP(ⁱPr₂N)P? P(ⁱPr₂N)DMP 15b . The functionalized aminosilyldiphosphine 7a is treated with methanol to yield the diphosphine (ⁱPr₂N)₂P? PH(SiMe₃) 16 and gives the lithium phosphinophosphide (ⁱPr₂N)₂P? PLi(SiMe₃) 17 after metallation with n-BuLi. The compounds are characterized by their NMR and mass spectra and the ³¹P-NMR values of the diphosphines are discussed according to their substituents. The crystal structures of 7b, 8 and 15b showing significantly differing conformations are presented.     

Magnetic microcapsules for targeted delivery of anticancer drugs

To achieve targeted distribution of anticancer drugs with sustained activity, ferromagnetic ethylcellulose microcapsules containing an anticancer drug, mitomycin C (FM-MMC-mc), were prepared by a method based on phase separation principles. Two prototypes of FM-MMC-mc were made: one with the drug as the core and zinc ferrite on its capsular surface (outer type); the other with both the drug and zinc ferrite as the core (inner type). Both preparations provided a sustained-release property and a sensitive response to conventional magnetic force, although certain differences in the release rate of drug, magnetic responsiveness, and particle size were found between the two dosage forms. Animal studies showed that the magnetic microcapsules could be magnetically controlled in the artery and urinary bladder. VX2 tumors in the rabbit hind limb and urinary bladder were successfully treated with magnetic control of FM-MMC-mc. Pharmacokinetic study revealed that the targeting of the microcapsules markedly enhanced the drug absorption into the surrounding tissues for a prolonged period of time. The results indicate the feasibility and effectiveness of the magnetic microcapsules as a targeted drug delivery system.     

Non-aqueous,reversed-phase,high-performance,thin-layer chromatography and column liquid chromatography of metal complexes of porphine

Summary The chromatographic mobility of 21H, 23H-porphine and its Ni(II), Cu(II), Zn(II) and Pd(II) complexes were investigated by high-performance thin-layer chromatography on an octadecyl-bonded, silica gel plate with various polar organic solvents including alcohols, acetonitrile, dimethylsulfoxide and propylenecarbonate. The mobility generally decreases according to the central metal ion of the complex as follows: Zn(II)>(free porphine)>Ni(II)>Pd(II)>Cu(II). Methanol is a good choice of solvent for the separation of these metal porphine complexes. Successful separation of porphine and the four metal complexes is accomplished within 13 min on a LiChrosorb RP-18 column with methanol eluent.     

Bis(phosphinimino)methanides as ligands in divalent lanthanide and alkaline earth chemistry - synthesis, structure, and catalysis

Divalent bis(phosphinimino)methanide lanthanide complexes of composition [{(Me₃SiNPPh₂)₂CH}EuI(THF)]₂ and [{(Me₃SiNPPh₂)₂CH}YbI(THF)₂] have been prepared by a salt metathesis reactions of K{CH(PPh₂NSiMe₃)₂} and LnI₂. Further reactions of these complexes with [K(THF)_nN(PPh₂)₂] led selectively to the heteroleptic amido complexes [{(Me₃SiNPPh₂)₂CH}Ln{(Ph₂P)₂N}(THF)] (Ln = Eu, Yb). The ytterbium complex can also be obtained by reduction of [{CH(PPh₂NSiMe₃)₂}Yb{(Ph₂P)₂N}Cl] with elemental potassium. The single crystals of [{(Me₃SiNPPh₂)₂CH}Ln{(Ph₂P)₂N}(THF)] contain enantiomerically pure complexes. As a result of the similar ionic radii of the divalent lanthanides and the heavier alkaline earth metals some similarities in coordination chemistry of the bis(phosphinimino)methanide ligand were anticipated. Therefore, MI₂ (M = Ca, Sr, Ba) was reacted with K{CH(PPh₂NSiMe₃)₂} to give [{(Me₃SiNPPh₂)₂CH}CaI(THF)₂], [{(Me₃SiNPPh₂)₂CH}SrI(THF)]₂, and [{(Me₃SiNPPh₂)₂CH}BaI(THF)₂]₂, respectively. As expected the Sr and Eu complexes and the Ca and Yb complexes are very similar, whereas for the Ba compound, as a result of the large ion radius, a different coordination sphere is observed. For all new complexes the solid-state structures were established by single crystal X-ray diffraction. In the solid-state the {CH(PPh₂NSiMe₃)₂}⁻ ligand acts as tridentate donor forming a long methanide carbon metal bond. Thus, all complexes presented can be considered as organometallic compounds. [{(Me₃SiNPPh₂)₂CH}YbI(THF)₂] was also used as precatalyst for the intramolecular hydroamination/cyclization reaction of different aminoalkynes and aminoolefines. Good yields but moderate activities were observed.     

NANOMECHANICAL MAPPING OF CARBON BLACK REINFORCED NATURAL RUBBER BY ATOMIC FORCE MICROSCOPY

Atomic force microscopy （AFM） has the advantage of obtaining mechanical properties as well as topographic information at the same time. By analyzing force-distance curves measured over two-dimensional area using Hertzian contact mechanics, Young＇s modulus mapping was obtained with nanometer-scale resolution. Furthermore, the sample deformation by the force exerted was also estimated from the force-distance curve analyses. We could thus reconstruct a real topographic image by incorporating apparent topographic image with deformation image. We applied this method to carbon black reinforced natural rubber to obtain Young＇s modulus distribution image together with reconstructed real topographic image. Then we were able to recognize three regions; rubber matrix, carbon black （or bound rubber） and intermediate regions. Though the existence of these regions had been investigated by pulsed nuclear magnetic resonance, this paper would be the first to report on the quantitative evaluation of the interfacial region in real space.     

BaFeO3-x与Cu-ZSM-5耦合催化剂的NOx储存还原性能

为替代传统的贵金属基NO_x储存还原（NSR）催化剂,本文设计并制备了不含贵金属的BaFeO_3-x+Cu-ZSM-5 耦合催化剂,用于催化消除稀燃发动机尾气中的NO_x. 在稀燃阶段,NO在BaFeO_3-x催化剂上发生了氧化和储存反应;在富燃阶段,从BaFeO_3-x催化剂中脱附出来未能消除的NO_x被置于其后的Cu-ZSM-5催化剂进一步催化消除. 实验结果表明,BaFeO_3-x+Cu-ZSM-5 耦合催化剂的工作温度窗口被拓宽到250-400 ℃,同时NO_x消除性能得到了显著提高：NO_x转化率最高可达98%,N₂选择性接近100%.     

C12-2-En-C12•2Br与SDS混合水溶液的胶团化研究

与[C12H25N＋(CH3)2CH2]2•2Br－(简记为C12-2-C12•2Br)/ C12H25SO4Na(SDS)混合水溶液相比,随着联接链上乙氧基团(E)数目增加,[C12H25N＋(CH3)2]2C2H4(OC2H4)n•2Br－(简记为C12-2-En-C12•2Br, n=2,3)与SDS混合水溶液澄清区域明显增大. C12-2-E3-C12•2Br/SDS混合胶团化过程中二组分产生了协同效应,理论预测在澄清区域所能达到的最小临界胶团总浓度(cmcT,min)= 0.0339 mmol•L－1,对应的SDS在溶液体相中的摩尔分数(x2*)=0.447.当水溶液体相中SDS摩尔分数(x2)=0.5时,混合胶团总聚集数(NT)=36,混合胶团中SDS的摩尔分数(x2M)=0.43.     

A chelating resin containing S, N and O atoms: Synthesis and adsorption properties for Hg(II)

A novel chelating resin containing S, N and O atoms (PSME-EDA) was synthesized by using poly(2-hydroxyethylmercaptomethylstyrene) (PSME) and diethanolamine (EDA) as materials. Its structure was characterized by elemental analysis, Fourier transform-infrared spectra (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The adsorption of the resin for Hg²⁺ was investigated. The saturated adsorption capacity of PSME-EDA for Hg²⁺ could reach to about 1.1 mmol/g at 25 °C when the initial Hg²⁺ concentration was 0.02 mol/l. Some factors affecting the adsorption such as temperature, reaction time and ion concentration were also studied. The results showed that adsorption was controlled by liquid film diffusion. The increasing of temperature was beneficial to adsorption. The Langmuir model was better than the Freundlich model to describe the isothermal process. The values of ΔG, ΔH, and ΔS calculated at 25 °C were −7.99 kJ mol⁻¹, 22.5 kJ mol⁻¹ and 34.4 J mol⁻¹ K⁻¹, respectively. The adsorption mechanism of PSME-EDA resin for Hg(II) was confirmed by X-ray photoelectron spectroscopy (XPS).